Hello people, I'm running the latest FreeFileSync "donation edition".
I have 2 VeraCrypt containers, one is in my USB Stick - I will call it A.
One is in my laptop's HDD - I will call it B.
I made a "Two way" batch file, it's running in startup via RealTimeSync.
When I log into my PC, I open the A+B containers with VeraCrypt.
I need to synchronize A to B.
When I work inside A, batch doesn't automatically synchronise files in B. I have to load it manually.
Why? thanks for your help
VeraCrypt Containers
- Posts: 3
- Joined: 17 Mar 2023
- Posts: 3
- Joined: 17 Mar 2023
Ok. I found what the problem is but please help me solve it.
RealTimeSync shows a pop-up windows once it opens.
After synchronization, pop-up stay on. If I minimize the pop-up, it starts synchronizing.
I need to make this pop-up minimized.
I'm running Win11 64bit and FFS donation 12.1. Thanks.
RealTimeSync shows a pop-up windows once it opens.
After synchronization, pop-up stay on. If I minimize the pop-up, it starts synchronizing.
I need to make this pop-up minimized.
I'm running Win11 64bit and FFS donation 12.1. Thanks.
-
- Posts: 2291
- Joined: 22 Aug 2012
To prevent confusions:
It is not RealTimeSync (RTS) you are talking about, it is FreeFileSync (FFS).
In order to run FFS minimized, you need to save your sync configuration as a *.ffs_batch file, and follow the instructions as described here.
It is not RealTimeSync (RTS) you are talking about, it is FreeFileSync (FFS).
In order to run FFS minimized, you need to save your sync configuration as a *.ffs_batch file, and follow the instructions as described here.
- Posts: 3
- Joined: 17 Mar 2023
You're right man, thanks. I was in a rush when I read the instructions, I'll try it later.To prevent confusions:
It is not RealTimeSync (RTS) you are talking about, it is FreeFileSync (FFS). Plerry, 21 Mar 2023, 10:42
