Hi, everyone.
May be someone will help me.
I`ve configured batch run for 4 folders which are syncing to 4 different folders with archiving all changes to own paths.
But after saving batch run and adding to real time sync auto run doesn`t work, every time I run it manually.
Configuration setting see in attach (archive paths different 4)
I will be grateful for any help!
Batch run configure
- Posts: 10
- Joined: 15 Jan 2024
- Attachments
-
- 1.png (199.92 KiB) Viewed 1848 times
- Posts: 2430
- Joined: 22 Aug 2012
Your problem description is not very clear (at least to me), particularly the part "auto run doesn`t work, every time I run it manually."
Also not clear: "archiving all changes to own paths"
This suggests you would use local sync settings, with a specific Versioning location per left-right folder pair. However, the image you show suggests you use global Versioning settings.
Or, perhaps your problem is simply related to this.
Also not clear: "archiving all changes to own paths"
This suggests you would use local sync settings, with a specific Versioning location per left-right folder pair. However, the image you show suggests you use global Versioning settings.
Or, perhaps your problem is simply related to this.
- Posts: 10
- Joined: 15 Jan 2024
Hi Plerry, sorry for the unclear explanation
In my case:
\\server1\folder1 -> D:\folder1; Versioning on D:\Archive\folder1
\\server1\folder2 -> E:\folder2; Versioning on E:\Archive\folder2
\\server2\folder3 -> D:\folder3; Versioning on D:\Archive\folder3
\\server2\folder4 -> E:\folder4; Versioning on E:\Archive\folder4
Each path has 'local sync settings'
Saved to batch job and running with real time sync
In my case:
\\server1\folder1 -> D:\folder1; Versioning on D:\Archive\folder1
\\server1\folder2 -> E:\folder2; Versioning on E:\Archive\folder2
\\server2\folder3 -> D:\folder3; Versioning on D:\Archive\folder3
\\server2\folder4 -> E:\folder4; Versioning on E:\Archive\folder4
Each path has 'local sync settings'
Saved to batch job and running with real time sync
- Posts: 2430
- Joined: 22 Aug 2012
But what exactly is your problem/issue? E.g.
• Does RTS not start/run? If so, how do you start RTS?
• Does the FFS sync not run when invoked by RTS?
• Does Versioning not work as expected?
• ... ?
Note that for an FFS sync to run, all locations specified in your FFS sync configuration need to be available/on-line.
• Does RTS not start/run? If so, how do you start RTS?
• Does the FFS sync not run when invoked by RTS?
• Does Versioning not work as expected?
• ... ?
Note that for an FFS sync to run, all locations specified in your FFS sync configuration need to be available/on-line.
- Posts: 10
- Joined: 15 Jan 2024
My issue is that sync doesn`t start after n-seconds left with active folder tracking
- Posts: 10
- Joined: 15 Jan 2024
when I start FFS manually sync pass normally
- Posts: 2430
- Joined: 22 Aug 2012
How do you start RTS?
• Manually, e.g by double clicking the *.FFS_real configuration file?
• Via your Autostart folder?
• Via the Task Scheduler? If so, under what user credentials do you run the task?
• Manually, e.g by double clicking the *.FFS_real configuration file?
• Via your Autostart folder?
• Via the Task Scheduler? If so, under what user credentials do you run the task?
- Posts: 10
- Joined: 15 Jan 2024
- Posts: 2430
- Joined: 22 Aug 2012
That's how you configure RTS, not an answer to my question how you start RTS.
- Posts: 10
- Joined: 15 Jan 2024
it always on taskbar
Maybe we are misunderstanding each other
Maybe we are misunderstanding each other
- Attachments
-
- 1.png (17.27 KiB) Viewed 1802 times
- Posts: 10
- Joined: 15 Jan 2024
I just ran realtimesync exe -> open batch run -> entered time interval -> press start
- Posts: 10
- Joined: 15 Jan 2024
I`m not using via Autostart folder, Task Scheduler.
Once I`ve started real time sync exe (application), selected batch run file (.ffs_batch), configured interval and push Start button.
My host not turn off, my user not log out.
Real time sync active in task bar tray.
Once I`ve started real time sync exe (application), selected batch run file (.ffs_batch), configured interval and push Start button.
My host not turn off, my user not log out.
Real time sync active in task bar tray.
- Posts: 2430
- Joined: 22 Aug 2012
Note, that RTS does not have a (time) interval, but an Idle Time.
Read the description in the RTS Manual page.
If any new changes occur in the RTS monitored directories during the Idle Time, the Idle Time timer is reset.
If there are too frequent changes in any of the RTS monitored directories, the Idle Time timer may get continuously reset before it expires.
Only when that timer expires, the RTS Command Line is executed (normally launching FFS).
Setting your RTS Idle Time excessively long (for your use case), may thus cause FFS never to be launched.
Read the description in the RTS Manual page.
If any new changes occur in the RTS monitored directories during the Idle Time, the Idle Time timer is reset.
If there are too frequent changes in any of the RTS monitored directories, the Idle Time timer may get continuously reset before it expires.
Only when that timer expires, the RTS Command Line is executed (normally launching FFS).
Setting your RTS Idle Time excessively long (for your use case), may thus cause FFS never to be launched.
- Posts: 10
- Joined: 15 Jan 2024
Plerry, Thanks for your patience and clarification.
I will try to increase RTS Idle Time.
But in mirror configuration it works fine
I will try to increase RTS Idle Time.
But in mirror configuration it works fine
- Posts: 4008
- Joined: 11 Jun 2019
You would need to decrease the idle time, not increase
- Posts: 10
- Joined: 15 Jan 2024
Hi everyone.
I`ve tried to increase and decrease the idle time, still not working.
I`ve tried to increase and decrease the idle time, still not working.
- Posts: 2430
- Joined: 22 Aug 2012
If you don't manage to get FFS launched by RTS, you can always resort to launching your FFS sync as a scheduled task.
Obviously, this may not run the sync "as soon as" as a change occurred, and may run unnecessary syncs (because no changes occurred), but at least the sync process will run.
Obviously, this may not run the sync "as soon as" as a change occurred, and may run unnecessary syncs (because no changes occurred), but at least the sync process will run.