I have 2 computers: Win 10 & WinXP. I keep certain folders sync'd with FreeFileSync. However, if I run a sync on a folder named "Info to Read From the Internet", I get the following message every time, telling me that the recycle bin on WinXP is not available:
11:58:20 AM Warning: The recycle bin is not available for "\\I5SYS\Data\Info to Read from the Internet".
Ignore and delete permanently each time recycle bin is unavailable?
11:58:20 AM Warning: Deleting file "\\I5SYS\Data\Info to Read from the Internet\~$hone 6S & Later.doc" [Recycle bin unavailable]
However, the files themselves do sync correctly. It's just that I keep getting these warnings.
How can I correct this?
Thank you in advance!
Completed with Warnings?
- Posts: 59
- Joined: 24 Nov 2020
- Posts: 4059
- Joined: 11 Jun 2019
viewtopic.php?t=10724
Switch deletions to be permanent instead of going to Recycle Bin. You cannot send things to a remote location's Recycle Bin
Switch deletions to be permanent instead of going to Recycle Bin. You cannot send things to a remote location's Recycle Bin
- Posts: 59
- Joined: 24 Nov 2020
Thank you for your quick reply. On my Win10 machine, when I click the sync button, I see the image below.
I want to be able to save the last version on my Win10 machine, in case I make a mistake.
Am I able to do this and delete on my WinXP machine (I only have FreeFileSync actually installed on my Win10 machine)?
I want to be able to save the last version on my Win10 machine, in case I make a mistake.
Am I able to do this and delete on my WinXP machine (I only have FreeFileSync actually installed on my Win10 machine)?
- Attachments
-
- Sync Versions.jpg (85.76 KiB) Viewed 32677 times
- Posts: 4059
- Joined: 11 Jun 2019
Versioning should work fine
- Posts: 59
- Joined: 24 Nov 2020
When I click on "Permanent", the versioning option disappears. I'm not sure how to delete on WinXP & keep the versions in C:\Users\Phil\Desktop\Versions. See attachment.
I'm sorry. Could you tell me what I'm missing?
I'm sorry. Could you tell me what I'm missing?
- Attachments
-
- sync versions 2.jpg (72.31 KiB) Viewed 32670 times
- Posts: 2453
- Joined: 22 Aug 2012
If you select Permanent (instead of Versioning) there will obviously be no more Versioning.
Simply select Versioning and (if not retained) specify the desired Versioning location (in your case apparently C:\Users\Phil\Desktop\Versions on the machine you run FFS on, apparently your Win10 machine).
When using Versioning, any pre-existing files that will be deleted or overwritten by your sync, whether on your WinXP machine or your Win10 machine, will then be "moved"/copied to the specified Versioning location (in your case on your Win10 machine).
Simply select Versioning and (if not retained) specify the desired Versioning location (in your case apparently C:\Users\Phil\Desktop\Versions on the machine you run FFS on, apparently your Win10 machine).
When using Versioning, any pre-existing files that will be deleted or overwritten by your sync, whether on your WinXP machine or your Win10 machine, will then be "moved"/copied to the specified Versioning location (in your case on your Win10 machine).
- Posts: 59
- Joined: 24 Nov 2020
Thank you for your reply. However, that leaves me with the original problem that I mentioned in the first question. I want to keep versioning on my Win10 machine, so that if I make a mistake in updating a file, I still have the previous file in my version folder.
BUT, this means that I keep getting the warnings that the recycle bin on WinXP isn't available. I don't know if there's a solution that allows me to keep the previous version on my Win10 machine & avoids getting the warning messages.
BUT, this means that I keep getting the warnings that the recycle bin on WinXP isn't available. I don't know if there's a solution that allows me to keep the previous version on my Win10 machine & avoids getting the warning messages.
- Posts: 2453
- Joined: 22 Aug 2012
> BUT, this means that I keep getting the warnings that the recycle bin on WinXP isn't available.
No that is not true.
If you set the Delete Files method to Versioning, FFS will not (try to) use the RecycleBin.
(Re)read the last paragraph of my pervious reply.
No that is not true.
If you set the Delete Files method to Versioning, FFS will not (try to) use the RecycleBin.
(Re)read the last paragraph of my pervious reply.
- Posts: 4059
- Joined: 11 Jun 2019
I wonder if this is a bug then... If FFS is set to versioning, it shouldn't care about Recycle Bin access, but it sounds like FFS is throwing the error anyway. Is it really versioning and the warning is a false positive? Or is it not versioning the files deleted/overwritten on the remote machine?
- Posts: 59
- Joined: 24 Nov 2020
Thank you both for your replies.
Plerry: I have versioning set on my Win10 machine. However, I still get warnings that the recycle bin on WinXP isn't available. I'm not sure what you mean by "If you set the Delete Files method to Versioning, FFS will not (try to) use the RecycleBin." That's what I originally had shown in the image on post 9 Nov 2023, 21:24.
xCSxXenon: I'm not sure if it's a bug. The synchronization works fine. I can edit a file on either machine & when I sync, both machines end up with the same file. If I edit on Win10, I get the new file, a previous version (on Win10), & the file on XP is deleted (doesn't go to the recycle bin) & replaced. If I edit on Win 10, the exact same thing happens.
Plerry: I have versioning set on my Win10 machine. However, I still get warnings that the recycle bin on WinXP isn't available. I'm not sure what you mean by "If you set the Delete Files method to Versioning, FFS will not (try to) use the RecycleBin." That's what I originally had shown in the image on post 9 Nov 2023, 21:24.
xCSxXenon: I'm not sure if it's a bug. The synchronization works fine. I can edit a file on either machine & when I sync, both machines end up with the same file. If I edit on Win10, I get the new file, a previous version (on Win10), & the file on XP is deleted (doesn't go to the recycle bin) & replaced. If I edit on Win 10, the exact same thing happens.
- Site Admin
- Posts: 7212
- Joined: 9 Dec 2007
This line suggests that you have "recycle bin" selected, not "versioning". For "versioning" the info message would be different.11:58:20 AM Warning: Deleting file "\\I5SYS\Data\Info to Read from the Internet\~$hone 6S & Later.doc" [Recycle bin unavailable]
- Posts: 4059
- Joined: 11 Jun 2019
That is what I assumed earlier, but he stated that he does get a version after updating a file...This line suggests that you have "recycle bin" selected, not "versioning". For "versioning" the info message would be different. Zenju, 13 Nov 2023, 07:1011:58:20 AM Warning: Deleting file "\\I5SYS\Data\Info to Read from the Internet\~$hone 6S & Later.doc" [Recycle bin unavailable]
- Site Admin
- Posts: 7212
- Joined: 9 Dec 2007
I need to see this to believe it.That is what I assumed earlier, but he stated that he does get a version after updating a file... xCSxXenon, 13 Nov 2023, 15:12
- Posts: 59
- Joined: 24 Nov 2020
I get a previous version on my Win10 machine, where FFS is installed. I don't have a version or FFS installed on my WinXP machine. I should also mention that the "Info to Read from the Internet" folder is sync'd automatically.
I just created a "New Text Document.txt" in that folder on my Win10 machine. After 10 seconds, I got a message that it was sync'd successfully on XP. I then deleted the "New Text Document.txt" on Win10. After 10 seconds, I got this warning:
I just created a "New Text Document.txt" in that folder on my Win10 machine. After 10 seconds, I got a message that it was sync'd successfully on XP. I then deleted the "New Text Document.txt" on Win10. After 10 seconds, I got this warning:
- Attachments
-
- warnings2.jpg (65.02 KiB) Viewed 32603 times
- Posts: 4059
- Joined: 11 Jun 2019
Can you post a picture of your versioning settings? That warning looks like versioning isn't enabled
- Posts: 59
- Joined: 24 Nov 2020
Sure, but it's enabled. It's the 3rd post above (9 Nov 2023, 21:06), where I responded to you.
- Site Admin
- Posts: 7212
- Joined: 9 Dec 2007
The configuration you're showing on the screenshot is not the one you have set up to run via RealTimeSync.
- Posts: 59
- Joined: 24 Nov 2020
Thank you! You're absolutely right. Of all my sync jobs, this was the only one NOT set up for versioning...it was set for recycle bin. I've now changed it & consider this solved.The configuration you're showing on the screenshot is not the one you have set up to run via RealTimeSync. Zenju, 13 Nov 2023, 19:17
Thanks to everyone who responded. I feel very foolish, but I have learned.
- Posts: 4059
- Joined: 11 Jun 2019
How did you figure this out... I am staring at the pictures and cannot find any info that would led to that conclusion lolThe configuration you're showing on the screenshot is not the one you have set up to run via RealTimeSync. Zenju, 13 Nov 2023, 19:17
- Posts: 1038
- Joined: 8 May 2006
Staring at the pictures certainly did help.
But what you did not understand, or pick up from that (& nor did I), is what Zenju said (above):
Words can be more powerful then pictures - especially when used in conjunction with pictures ;-).
So (once again) the answer was provided, though to "us", we didn't understand the answer.
Luckily, phrab did correctly pick up on it.
But what you did not understand, or pick up from that (& nor did I), is what Zenju said (above):
viewtopic.php?t=10824#p41366This line suggests that you have "recycle bin" selected, not "versioning". For "versioning" the info message would be different.
Words can be more powerful then pictures - especially when used in conjunction with pictures ;-).
So (once again) the answer was provided, though to "us", we didn't understand the answer.
Luckily, phrab did correctly pick up on it.
- Posts: 4059
- Joined: 11 Jun 2019
I'm wondering where RTS was referenced...
- Posts: 59
- Joined: 24 Nov 2020
I knew it was RTS because 1) I had it sent up that way, & 2) the sync icon was black (non RTS are green). So I just clicked on the icon in FFS, clicked on the filter icon at the top of the screen, & clicked on the synchronization tab. I saw that is was set for "Delete and Recycle bin". I changed that to "versioning" & the problem disappeared.
- Site Admin
- Posts: 7212
- Joined: 9 Dec 2007
A real puzzle, indeed! :) These two pieces of information gave it away:I'm wondering where RTS was referenced... xCSxXenon, 13 Nov 2023, 21:54
Confusingly, the existence of the results screen after each sync doesn't make any sense when using RTS, but it was still the only possible explanation.folder is sync'd automatically. [...] After 10 seconds phrab, 13 Nov 2023, 17:16