FreeFileSync Forum

Looks like the solution is quite easy, if done by FFS itself!
viewtopic.php?t=7537#p25579
https://help.dropbox.com/files-folders/restore-delete/ignored-files

Same for me, only on the local DropBox folder. Usually pressing "Retry" solve the problem!

Honestly I do not rembember which was the last combination of DB and FFS versions that were wrking...

Currently:
DB version: 241.4.4853
FFS: 14.7

earlier versions of Windows like WinXP were capable of handling these files, new Windows stumbles on them. Windows expects either a .extension or a blank filename, but never a file ending in a period.

Uhm... I just tried on an old virtual WinXP and I simply wasn't able to create a file ending ...

...it's a FAT "feature"...

https://freefilesync.org/manual.php?topic=expert-settings
FileTimeTolerance:
By default file modification times are allowed to have a 2 second difference while still being considered equal. This is required by FAT/FAT32 file systems which store file times only with a 2 ...

Windows to Windows uses new method, encouraging you to use One Drive.
https://support.microsoft.com/en-us/help/4092694/windows-10-changes-to-file-sharing-over-a-networkbig610, 14 May 2018, 16:35

encouraging is different from forcing... :-) :-) Sharing over a network is still available... :-)

I cannot test that but I'm pretty sure you can still see shared resources on Windows from non-Windows because the SMB protocol and the "server service" is still there...
You will have to create by yourself the needed account/pwd on both the "server" and the "client", of course same account name and ...

Bad, if you have a Mac & Linux & Mobile, with Windows, no sharing or seeing each other.

I think that you didn't understood correctly the MS statement: only the "homegroup" has been removed, NOT the sharing as done for ages before the "homegroup"!!!
"Homegroup" was just a way to simplify sharing ...

Off course I did it!!!
The auto-close option is simply closing immediately the window.
In this topic we were talking about the "auto-close" and not the action like shutdown/sleep.

May I suggest to put the field added with v9.7 somewhere else?
Right now it's on the same row as the profile name so it's "wasting" space for the profile name itself!
It would be nice to have it under the profile name, eventually with a collapsible entry!

This is great, but may I suggest the option to add a "time-out"? It can be helpful to see the results at least for a few seconds...!!!

I'm voting for this too! previously it was possible to just "close" the sync window!
Eventually I suggest an option like "auto-close after X seconds"

2- The detect moved files functionality seems limited. It works when I have edited photo's and the editor puts the original in a subfolder.Vansloneker, 22 Oct 2017, 08:50

Have a look here viewtopic.php?t=4542&p=15780#p15759 it could be related to the file system you use...

I "bet" that exFAT has the same limitation as FAT regarding the file's identification for catching move operations...

What File System are you using? FFS is able to track the move only on some File System, read the last note here https://freefilesync.org/manual.php?topic=synchronization-settings
I have the same problem when the source is on a virtual disk created by BoxCryptor...

...but the registry change i still worth trying... (IF the file in error is an .OST one)

When outlook doesn't run the copy works. But this setup will get automated so it will need to deal with this in the end.

If the files in use (you didn't specified extensions) are .ost then these are by default excluded from shadowcopies or any backup/copy made via VSS.

https://msdn.microsoft ...

Bug report: FreeFileSync does not work with mapped network drive letters.

...or: have you run FFS elevated? By default the elevated process doesn't share mapped drive from the non-elevated account.
There is a registry entry to change to enable the mapped drive sharing (I did it on my Win10 pc ...

it is fixed in the most recent version of Android.

I would use "It should be fixed on Android 8"... Basically it will be completely rewritten the lower layer for managing external memory, but if the connection protocol will still be MTP I would wait to see with my own eyes if the problem will be ...

It's been fixed, but it'll be Android 8 at least before it's fixed.

I would use "It should be fixed on Android 8"... Basically it will be completely rewritten the lower layer for managing external memory, but if the connection protocol will still be MTP I would wait to see with my own eyes if ...

:-( of course disabling the network is still a good option to avoid any software offer...

I truly think that this may be a security / permissions issues. The Windows Environment is just so security conscious and overly protective with just the simplest tasks as making copies and backups.
I cannot explain you briefly how security on NTFS works, but for sure you'll find many guides ...

That's not exactly the same error reported (reading for the OP, writing in the FAQ).
The solution should actually be correct, but one must remember to run FFS elevated or change the property to always run it elevated with the annoyance to always accept the UAC prompt...
My solution is a bit more ...

Are you running on a UAC aware os? Is UAC active?
If so you better add yourself explicitely into ACLs.
Let me try to explain better:
In my own pc I have always disabled UAC because they are my pc and I known what I'm doing. I'm also member of local group Administrators.
I do have an external USB ...

there is no GlobalSettings.xml in my w10-64 bit at C:\Program Files\FreeFileSync or any folder below
Did you actually read the link posted by Plerry???
The file is where all the settings should be: into your own appdata folder! From the help page linked:
"To locate this file on Windows enter ...

I suggested the same a years ago... +1

Sorry for bumping this old topic, but since I'm moving my old Win7 laptop to a new one with Win10 I'm facing the same issue.
On the old Win7 UAC was off while on Win10 is enabled (because it cannot be really disabled as on Win7).

The two folders I'm sync'ing are one on my laptop and the other on an ...

The FFS backup action runs and completes, but the messagebox runs but never completes.malcolmp

How did you set the running context, privileges and user?

That is perfect!!!

If the new file is below the base folder, then this is the expected behavior.
I have replicated the same sync and I confirm that the file wasn't on the base folder...
2016-06-07_11-20-59_R__Documents_Miei_DirSyncJobs_ParkUSB2ParkD.ffs_gui.png
2016-06-07_11-21-49_R__Documents_Miei_DirSyncJobs ...

Can you make it optional? With the new layout (see my other request) if only Item name is shown we cannot check the folder where the file is!

No, it was deeper at least 4 levels (I'm on phone and do not remember exactly).
Anyway I think, IMHO, that the Overview should always be populated...

In case there is only one new file in one side, the Overview is not populated.
I have tried swapping folders with the dedicated button but Overview is still empty...

The changes in the beta above will be in the next official release.
Please let the user decide, I have just upgraded to v8.2 and I had to rebuild the layout I want (unfortunately the <Perspective4> item has not been migrated to the new format...)
Now I just cannot recreate my layout: I would like ...

That's not quite true since the root of the problem is the Most Troublesome Protocol (MTP).zlhnxqgf

...here I have reported a few Android's official bugs still unresolved... :(

That's a very bad news... Tired of all the MTP's *stupidity* I was seriously thinking about rooting my MotoG 2014 and use a CM build... but I guess they didn't touch the sources so the MTP errors *implemented* in the official Google sources are present into CM builds too...

Because an account must be provided, either implicitely or explicitely:
- create an account with same name and password on both machine, give them the permissions needed and use it to login (implicit)
- map the remote destination with a remote user/password, you can use just "net use \\remotepc ...

Unfortunately MTP is a "crappy protocol", look at this my old comment about MTP implemented on Android: viewtopic.php?t=2166&p=9246#p9246

In my tests the modification time seemed to be totally unreliable: On most devices it is simply ignored and set to "whatever the device considers current time", or worse on Galaxy S4 setting modification time seemed to work, but after unplugging and reinserting the device, the modification time ...

6.12 as well as 6.11 is NOT mirroring timestamp from left to right. Means, same set of data is copied over all the time, instead once and then only changed data from left to right side again.

BR,
Mike
Which kind of data are you coping?
Personally I had a problem like that until a few days ago but ...

That means FFS will stop changing the "creation time" and will work like I wrote here: [404, Invalid URL: https://sourceforge.net/p/freefilesync/feature-requests/292/#a772]
if Yes it's GREAT!

Implemented for 5.21: [404, Invalid URL: http://freefilesync.sourceforge.net/FreeFileSync_5.21_beta_Windows_Setup.exe]Zenju

Database support for detecting move/rename is still not available (checkbox cannot be ticked) for: Update & Custom!

I think you have found just a *turnaround* (do not know the exact english term! :-)
And yes, scheduled tasks run on different sessions by default: you need to select "Run only if user connected" to have it use the same session... :-(

Which OS are you using?
Tasks are scheduled to run ender the same account used to configure Boxcryptor?
HAve you saved the Boxcryptor's credential or do you have to type at startup?

i.e. On Seven you can tell the scheduler how to run the job, I guess that for being able to use a Boxcryptor drive ...

I have used it for a long time sync'ing terabyte of data without a problem (regarding this "topic"), sometimes SyncToy too was doing a copy/delete instead of a move; so I guess it was able to handle what you are talking about.
I remember that where was some kind of sync source example somewhere on ...

Uhm... my old tool, SyncToy by MS, was able to detect moves everywere... it has other major drawbacks (and that's way I moved to FFS :-) but the move detection was the only reason I have used for many years "closing an eyes" on its problems... I really hope you'll find a way to solve this... SyncToy ...

Scenario: I have installed DropBox and BoxCryptor to protect a subfolder, this subfolder is then *exposed* as a virtual disk formerly using FAT32.
I use FFS to keep a local backup of DB and a local (unencrypted) of BC in two different folders. My local disk is NTFS.
Both the jobs are configured as ...

I've asked the same a long time ago, me too I prefere to see every single deletions instead of only the "father folder"!

Ok, I have omitted the "per volume"... but it's still one container "flat",
without a directory structure... :-)

I understand what you mean, but the word versioning gives the user a
"specific" idea of what it means! ...at least it did it with me (and english
is not my mother language ...

> Hm, Microsoft seems to think it's useful, and most users probably think
Windows Recycle Bin is useful, so a "limit by total size" cannot be a plain
stupid idea, at least

Uhm... I think you are mixing apples with pears... :-)
The Recycle Bin is just ONE single container, while with the term ...

So far I was only reading this interesting topic, personally I do not use the
versioning because I do not agree on keeping the files on one "side" only... I
have wrote somewhere else that it's a nonsense to move from one side to the
other the "versioned" files... :-)

Anyway me too I would like to ...

Search found 73 matches