FreeFileSync Forum

1) process elevation and folder permissions are unrelated topics. 2) This is Windows "User Interface Privilege Isolation" in action: [URL]

I didn't. But when I look at it now, I see where I have 9,310 files on the left side and 9,118 files on the right side. Glancing through the files on the right side, I see that the…

Hi Plerry, thank you for this detailed answer. Yes, you're right. I'm using FreeFileSync with Windows. I know, that Windows can save the credentials in the credentials manager. I f…

Dear, From time to time the program enters the state "Examining" and this state lasts for hours! During this process, at the top of the screen is the message: Waiting while the dir…

That is exactly why you have the choice to define what should happen in case (different) files exist on the left- and right-side.

following：viewtopic.php?t=5579 “Fixed for the next release: [URL]”

I started getting i/O errors and eventually discovered that the target hard drive in the file folder pairs had developed a corrupted partition table. It took me a long time to find…

Now the command is as follows: [Code] And the result: [Code] Hope you have an idea.

[Quote] Yes, this has been implemented in FreeFileSync 10.3.

Hi Solved with specific mount command instead of automatic mount from Nautilus sudo mount -t cifs -o username=<name on SMB server>,password=<...>,\ gid=1000,uid=1000 \ //<IP of Sam…

Hi, suddenly it takes about 7h for syncing 800 MB. There seems to be something completely wrong. cheers Eric

Actualy I need FTPS (ssl/tls) Nothing more nothing less.

following：[URL] “Fixed for the next release: [URL]” it solve my question

Hello, After sync i got multiple duplicate files. I attached my log. "DOSYA TESLİM TUTANAĞI" files are duplicates. I'm using sync from one folder to another with mirror. But i got …

Hi, I've already paid to help development and get the donation edition. When i launched the 10.2 version this morning, it claimed that there's 10.3 donation edition available onlin…

I'm using FFS for some month now and have to relalise that there must be a serious issue in the way I'm using it or in the way it works. The reason is that loads of original files …

This behavior will change in 10.4: [URL]

I have been trying to sync a local folder with a folder on my WDMyCloud drive. The folder is private. I have tried every possible way... any help would be apreciated.

Hi, I have musics on my PC encoded in FLAC, and the same musics on my smartphone encoded in AAC. When i delete a music on one of this peripherics i would like to synchronize this d…

Hi, I would like build the source code of V10.3 for Windows 64 or 32 Bit as target. What for a compiler, tools etc. are neccessary for compiling the source code. Is here a instruct…

Hi Plerry, Thanks very much indeed for this advice. It appears I haven't properly understood how to use the program. This may solve the issue in an unexpected way and bring other b…

I have bought a notebook with Endless OS. And I have a Windows computer in my home network as a NAS. I configured access to computer HDDs from the notebook and I can copy files&fol…

errorlevel 1 comes with the change to 10.3. My script showed me the old logfile before change, and not the new one with your logpath-warning. volker01

Thank you very much. Now it works. :)

Can you help please, I'm at a loss to understand how to replace the COMMAND_TO_TRACE with something sensible, surely it can't be freefilesync? I’m getting a file copy error, FFS fi…

[URL]

[URL]

[URL]

[Quote] Then you're using the non-donation edition.

Can you help please, I'm at a loss to understand how to replace the COMMAND_TO_TRACE with something sensible, surely it can't be freefilesync? Yes I can use Nautilus to copy files …

Thanks for the reply! Comparing by size may be problematic so I will not set it this way. I'd rather take a look at another firmware for my TP-Link Archer C50 router. Perhaps OpenW…

The problem is a combined failure of both libssh2 (which FreeFileSync is using) and the macOS SFTP server: The SFTP server thinks the target file is already existing, hence "LIBSSH…

I have write access to both locations. They are both local.

If you define a single FFS job having two (here identical) left-right folder pairs (as per the above example), the sync is just a single instance of FFS. If you would define it as …

Thank you for the fast response Zenju! I appreciate you pointing me in the right direction. For the "Two Way Synchronization" to work, both laptops will have to be on a network tog…

HI all, maybe my question was already raised up in the past but I'm new at this forum. With my donated version of FFS I want to synchronize two folders (one is my Laptop folder, se…

Hello, I am new to this software but I ran into a bug and though that I should report it. I hope that this is the correct place to post this. I am running Mac 10.11.6 . As a test I…

[Quote] To bypass this, I set the sync settings so that FFS does nothing to files which are newer on the right side.

Yes, that is a nice option, 100% agree with this solution. I think this needs to be included in FAQ/Help Documents.

Glad you worked it out, Zenju. Glad you'll code a fix. "Polish the stainless mirror," as they say. Good work!

Having local sync settings only makes sense when using multiple left-right pairs and therefore are only shown then. But, as you have (re)discovered: often only in hindsight things …

amazing...no reply.

I can't donate, with the options you give me :-( Is there a i-deal option, or in the make...... Greetings, Harm

Menu -> Tools -> Options: "Show hidden dialogs".

Good Morning, Could you add a linux version (x64) in the Donation Edition ? The software works great on windows 10 :) . Thank you in advance, Benoit,

Many thanks !

thanks Zenju - are you saying the only option is to have a single scheduled batch job which backs up to the two external drives simultaneously ? at the moment I back up the content…

Hi, I just installed FFS and after several trials I still cannot properly handle this. The only way I can do it is to select one level below the directory (symlink) I want, and un-…

It seems you installed the free version instead of the "Donation Edition".

I recently started using RealTimeSync to sync 2 drives automatically. After I started using this MS Word program opens up automatically after closing a Word document. The only way …