FreeFileSync Forum

Finally, I got it. Probably, it was a translation mistake. Thank you.

[URL]

You can change the device count directly on the thank-you page.

One other Android SD Card anomaly that relates to files on an SD card installed in an Android Device. I had problems with notification alerts that it took me a while to track down …

So, just when I wanted to start testing the version in your link, I saw that 11.4 is out. Downloaded the Donation Edition and - voila - it works. Thanks! :-)

If it's still running, I can have a look where it hangs: [URL]

Not boring at all. Takes about 4 minutes to clone the disk and another 1 minute to change the disk out. I don't have run an Anti Virus program (which it seem they are always out of…

Just checked it out, looks great!

@troyrock As both computers are not connected, you would always need a portable data carrier being carried back and forth between the two computers, e.g. your intermediate external…

Simply select or open the relevant *.ffs_gui configuration in the FFS GUI, making it the active configuration, and then use the Save As Batch-file icon (the one with the extra blac…

Thanks, it looks ok now

Who uses Raspberry Pi? I tried to install FreeFileSync with Wine on Raspberry Pi Raspbian. But some runtime environments were missing. Who can send me a DEB File of FreeFileSync fo…

I had Problems on Linux Ubuntu x86 with online storages. My Webdav Drives disappeared after some time. So i had to backup on hardrive. Then i tried to install FreeFileSync with win…

[URL]

Thanks :-) I defined 5 parallel operations on my ftp device but 20 on my local disc. I assumed that the 5 will be applied to synchronization as well, since I did not read this: [Co…

Does anybody have a installable download for Free File Sync for the Raspberry Pi 4 (or other Versions 1-3) ? A DEB File , for example, which i can install. In past i had many windo…

Oh my friend, worked smoothly, thank you so much. Did not know about that "=" opotion. Thank you again..

There us only one previous session that it shows. Everything under "last session" will be sync configuration files that you have saved as an independent job, or a batch job. If you…

Still a a nice to have in 2020!

Just check box simply enables that option. Min/max are the number of versions to keep, obviously max must be equal to or larger than minimum. And yes, it will keep them for 365 day…

In FFS, the settings for the sync jobs contains the options for a post-sync command. Oh yes, I do see the problem you described though. I'll keep pondering on hopefully finding a s…

Nope! FFS is a sync tool, not a duplicate finder. It will only compare between the left and right base location, and only compare identically named files in the identical (sub)fold…

Did more tests, thanks for the suggestions, after carefully checking the files it seems that indeed some of them are getting corrupted, in fact there is 0 bytes copied, but some we…

Thanks Plerry. I can follow that.

My servers are running without UI, so unfortunately this is no option for me. These are systems like a Synology NAS and a LibreElec on Raspi. Maybe this is use case is specific to …

Simply use the Mirror sync variant. See [URL].

@Zenju Thank you. The beta version solves my problem. Greetings.

Good morning I have an Ubuntu 20.4 (Samba server) with two disks on board (Main and BackUp) formatted in NTFS. Using FFS 11.3 for Linux I receive the message "Cannot write modifica…

is there a way to not ignore all errors but only all errors of the given (the error the popup is for) type? if an error occurs there is a popup which asks me to ignore only this er…

Considering FFS is a sync tool, it will most likely delete it off the backup if you delete it off the source. You should look at the different sync methods as they will tell you ex…

So one, arguably bad, AV flagged something while everything else says it's good? Make your own deduction. Comodo is, along with most third-party AVs, more harm than good and what w…

Ok makes sense. Looks like I'll have to go through this extra work. Thank you

i rolled back the version and re-updated and it looks like that worked im using the portable version so it may of lost connection or something --- they were all 0kb files that did …

Check if their is an update to your router's firmware too. They may have made a change to make capitalization more consistent

Great! I have been able to run the jobs pretty safely now. Thanks for the help.

Doesn't EXT use inode/IDs that aren't stable, thus can't be used for detection?

Yeah, the right side is less than a GB of data to be deleted, yet it's 20k files. Looks like temp/cache files that have been removed since syncing

Thanks Plerry, I'm working my way through versioning at the moment, I'll report back once I've tested it thoroughly.

Thankyou for your detailed reply, I didnt see my notifications prompting me that you had replied, so apologies for being late. I will try this when I am back at work tommorow. I un…

I never experienced this, and have run FFS syncs without any problems between FAT, FAT32, NTFS, EXT3 and EXT4 formatted media, each with different data-block sizes. As far as I kno…

Thanks. :)

I FINALLY got FreeFileSync (FFS) to work after months of trying ( :D :D :D doing happy dance :D :D :D :D )! Woohoo! I still don't know exactly what happened to get it working. I ke…

HI, I have been having very slow upload speeds to Dropbox (200k/sec), and have been in contact with Dropbox and they are saying it is related to FreeFileSync. I have attached the m…

cool thanks

Same problem as [URL], it seems.

Sure. Now if only someone had time to report it to them...

Ok ! It works. Many thanks for your help. Regards, Michel.

thanks a lot!

I had a similar issue where i have three pc's running manjaro and freefilesync runs ok on one pc. On the other two FFS would lock up comparing around the 50,000 file mark. The two …

I am using the command & $ffs $path$application$set1 with ffs being the executable and the rest parameters in Powershell. It works well, but I made many attempts to capture the exi…